Posts Tagged ‘bun’

ALL HAIR, ALL WEEK!

Hosting a party? You’ll probably need a hairstyle that will hold up while you finish prepping the party for your guests. Now before you get intimidated and RUN from these 25 (which seems like a lot) steps, just know that most of theses steps are broken down into serious detail. It’s not that crazy, I promise. To duplicate this look, you’ll want to actually see the intricate details because that’s what makes this look so special. It shouldn’t take you more than 15-20 min to do after you’ve waved your hair. This looks extra-romantic when done on naturally curly or wavy hair–it also saves a lot of time! Ok, here goes!  (more…)

AND THE WINNER IS…

We’re excited to bring you the winner of our Pick Your Own TBD Tutorial and thank you to everyone who voted! The look you chose was LOOK 3! We’ve partnered with Vidal Sassoon Pro Series to create a step-by-step breakdown on how to get this look yourself and think you’ll love just how easy it is to do. This tutorial shows us how to get natural texture + a little volume without using a curling iron. Here’s how:

TOOLS:

 

  1. Start by washing your hair and only conditioning the ends lightly. On towel dried hair, spray Vidal Sassoon Pro Series Color Protect Spray from the middle to ends. This is an amazing light-weight conditioner that not only protects but also helps close the cuticle, creating more shine.
  2. Next up, pump a golf ball-sized amount of Vidal Sassoon Pro Series Boost & Lift Foaming Air Mousse into the palm of your hands.
  3. Massage it evenly throughout your roots. Really work it in to avoid ” flat spots” where you may have missed with product. If you spend a couple minutes getting it evenly distributed, you’ll get a better result with mousse!
  4. Now toss your hair all to one side and blow dry on high.
  5. Flip it to the other side and do the same. It’s okay to go back and forth. You want to get it about 90% dry, leaving just a little bit of moisture. NOTE: If you’re blowing out curly hair to get this look, blow it out all the way! 100% dry! Then see step 7!
  6. Last, flip completely upside down and make sure you dry the area by the nape of your neck.
  7. OPTIONAL: If you’ve blown out curly hair and it’s now 100% dry, spray a little bit of Vidal Sassoon Pro Series Repair & Finish Spray. This will restore a small amount of moisture and allow your hair to take the shape of the wave without causing the hair to curl back up.
  8. While your hair is still warm from blowdrying, wind all of it into a tight bun at the crown of your head (as you see in photo 8!) and secure it with pins. We prefer using hair pins (aka: U-pins) for this so they’re not too tight, but you can use bobbypins if you’re careful not to open them too wide. Avoid using ponytail holders as they can leave an unwanted crease. If you have shorter hair, you can make 2 buns by dividing the hair into two sections– one up top and one in back.
  9. Try and leave your hair in bun for at least 30 minutes. It needs time to cool in order to take the wave shape. This is great for those of you who do your hair at night because you can sleep on it and get an even better wave! Once the hair has cooled, remove the pins and lightly brush the ends if neccessary. Literally all we did in this photo was take it down after 30 minutes of cool down time, shake it out and brush the last 1 inch using a comb. If you want to, you can go over any unruly pieces with a large barrel curling iron or you can hit the ends with a flat iron for an edgier look.

Thank you to Vidal Sassoon Pro Series for collaborating with us on such a fun voting post. Good luck everyone and show us your waves on Instagram! Tag us @thebeautydept!

ROPE BRAID CHIGNON

photography/post/graphics: Kristin Ess

You asked for it! Remember the hair flowers post from Valentine’s Day? We got a ton of emails asking if we could show how the hairstyle from that post was done. You’re going to need a few important things to get this look, so we’ve teamed up with Pantene Pro-V. For this tutorial, we’re using 3 products from the Pantene “Stylers” line which is endorsed by one of our favorite hair heroes, Pantene Celebrity Stylist Danilo! We’re using a heat protector, a soft texturizing wax and a shaping spray. Here we go!

  1. Blow your hair out all the way and put it on top of your head in a bun for about 10 minutes. That should help re-direct the hair so it doesn’t lay too flat.
  2. Grab a little pile of bobby pins in assorted sizes.
  3. Take a “pea-size” dab of Texturizing Sculpting Wax in your palm. Rub your hands together to warm + soften it up.
  4. Massage it into the root. This will give us the proper texture and will keep the hair appearing flat + limp. Remember– this wax is water-based so don’t be afraid.
  5. Grab your 1″ curling iron + your Heat Protection Spray.
  6. Spray a light veil of heat protector over your hair, wait for it to soak into the hair, then wrap curl your whole head for more texture.
  7. Do a rope/french braid on one side and pin it in place using a large supportive bobby pin.
  8. Then rope/french braid the other side.
  9. Lightly tease the hair in back. This will give volume to the bun portion of your chignon.
  10. Pull all of your hair to one side and twist it the same direction you’ve twisted the rope braid. In this case,  you can see she’s twisting it upward and toward her face.
  11. Pin it in place as you go.
  12. When you get to the ends, tuck and pin them as you see illustrated in picture 12.
  13. Gently tug at your rope braid to loosen up the look and make it a bit more romantic.
  14. At this point, you should pull out any small whispy pieces you’d like. You can see what it looks like with more pieces pulled out versus zero pieces pulled out in the Valentine’s Day post.
  15. Do a final veil of hairspray with something that will stay put but not look helmet-y. Obsessed with this Shaping Spray.

Oh… and that cute little peach tulle dress is right here.

VALENTINE’S DATE HAIR IDEA

A while back I posted the top photo on my instagram page. I wanted to do a tutorial to show you how you can get this look. I also wanted to kill two birds with one stone and show you that even if you don’t have the same hair type as a girl wearing a certain hairstyle in a photo, you can still translate and modify the look to suit you and your hair type! Amy Nadine, who has finer hair that’s about shoulder length, lends me her blonde locks in the photo above and my friend Jaclyn in the tutorial below has more hair than 10 of us combine + it’s SUPER long and heavy. Their hair is totally opposite. With Amy’s hair, I gave it a bit more volume as I styled it (for example, I teased the hair before pinning the buns and pulled the braids apart a little further). But with super thick hair, I had Jaclyn coil the buns tighter and use a few more bobby pins to keep the braids a little tighter to the head. All I’m saying is don’t give up on trying an updo if you don’t have the hair you “think” you should have to get the look– at least give it a try and make it your own version! Here we go with the steps!

photos/post/graphic design: Kristin Ess

  1. Leave two sections out in front (basically everything from your ears forward) and clip them forward. Imagine the back of your head split into 3 sections. If you want a little volume, tease the crown and then make your first bun in back. Pin using small bobbypins and make sure the bun feels secure. If your hair is really thick and you need to use clear elastics as well, go for it.
  2. Next make bun number two right below that and pin.
  3. Now make the third (final) bun on the bottom and pin. These buns don’t need to be perfect– in fact, I think they’re better when they’re all a little different and have some texture.
  4. Using the hair in front that you left out, make 2 braids on each side and tie them off with the tiny clear elastics. You want to make one from the bottom half of your section and one from the top half of your section. Gently pull them apart to add some texture so they don’t look too “done”.
  5. You should have two braids on each side as you see in photo 5.
  6. Take the bottom braid from one side and wrap it around the bottom bun. You want to slide the braid in between the lowest bun and the middle bun and then wrap it around the base of the bun and pin it in place.
  7. I’ve illustrated a pattern in photo 7 so you can see how the braids are wrapped around.
  8. Once you’ve pinned your braids into place, check your balance in back by using a hand mirror. Make sure it looks good from all sides. Pin any unwanted stray hairs or fly aways and voila!

Hope everyone gives this a shot no matter what hair type you have. It’s a super-quick updo and it could be a great look for an upcoming VALENTINE’S date! xo